User Tools

Site Tools


The solution

At first Barry assumed it was two separate pieces screwed together, with a compartment inside. Not a bad assumption, but a wrong one.

Barry trying to unscrew the two halves.

Next he decided to clean the paint off to get a better look at it.

Then he put it in a vice and gave it some hefty donks with a hammer.

This revealed the seam as the weld was put into shear.

And a little shelf on the end.

Chisel time!


All done!

projects/solid_steam_card/solution.txt · Last modified: 2022/01/08 03:15 by tjhowse