projects:sand_drawing:work_logs:improvements
This is an old revision of the document!
Table of Contents
What I want to accomplish
- Improve the mechanical design
What I've done
I've made a few improvements changes since work log 2.
- Added optoswitches for zeroing axes,
- Tabs on arm1 and arm2 to pass through the optos,
- An arm to hold the optos.
- Rotated the pin hole that holds arm1 onto shaft1,
- Rotated the angle of the split that holds the two halves of arm1 together.
What I want to accomplish next time
- Assemble everything
projects/sand_drawing/work_logs/improvements.1587100315.txt.gz · Last modified: 2020/04/17 05:11 by tjhowse