User Tools

Site Tools


projects:crokinole_board:work_logs:work_log_3

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Next revision
Previous revision
projects:crokinole_board:work_logs:work_log_3 [2019/07/07 03:37] – created tjhowseprojects:crokinole_board:work_logs:work_log_3 [2022/01/23 00:22] (current) tjhowse
Line 1: Line 1:
 {{indexmenu_n>3}} {{indexmenu_n>3}}
 +[<6>]
 ====== What I want to accomplish ====== ====== What I want to accomplish ======
   * Build a wood steamer,   * Build a wood steamer,
Line 27: Line 28:
  
 Oddly after the steaming I noticed a few spots of what appeared to be black mould growing on the wood. I don't know if this is actually mould, it would've had to have grown very quickly. I suspect it might be blobs of tar in the wood that spread out when it got hot. I'll see how it sands. Oddly after the steaming I noticed a few spots of what appeared to be black mould growing on the wood. I don't know if this is actually mould, it would've had to have grown very quickly. I suspect it might be blobs of tar in the wood that spread out when it got hot. I'll see how it sands.
 +
 +{{:projects:crokinole_board:work_logs:pasted:20190707-034707.png}}
 +{{:projects:crokinole_board:work_logs:pasted:20190707-034723.png}}
 +
 +David Bell suggests that it is likely metal dust contamination from angle grinding or from the display racks at Bunnings, which then stains the wood when it gets hot and wet. I think this is the most likely culprit. I'll be sanding and staining this wood anyway, so hopefully I'll get away with it.
  
 ====== What I want to accomplish next time ====== ====== What I want to accomplish next time ======
  
   * Varnish a piece of scrap ply and sand it, then varnish it, then sand it...   * Varnish a piece of scrap ply and sand it, then varnish it, then sand it...
 +[<6>]
projects/crokinole_board/work_logs/work_log_3.1562470628.txt.gz · Last modified: 2019/07/07 03:37 by tjhowse