Differences

This shows you the differences between two versions of the page.

--- projects:crokinole_board:work_logs:work_log_1 [2019/07/03 11:08] – tjhowse
+++ projects:crokinole_board:work_logs:work_log_1 [2022/01/23 00:22] (current) – tjhowse
@@ Line 1: / Line 1: @@
 {{indexmenu_n>1}}
+[<6>]
 ====== What I want to accomplish ======
   * Decide what to buy,
@@ Line 6: / Line 7: @@
 ====== What I've done ======
-I decided to go with oil-based everything, because I like the smell and it's much cheaper.
+I decided to go with oil-based varnish and stain because I like the smell and it's much cheaper.
 === Wax ===
@@ Line 26: / Line 27: @@
 {{:projects:crokinole_board:work_logs:pasted:20190703-070221.png}}
-I should be able to cut the top piece of of the centre, and the bottom piece out of the corners.
+I should be able to cut the top piece out of the centre, and the bottom piece out of the corners.
 === Edge strip ===
@@ Line 33: / Line 34: @@
 === Disks ===
-{{:projects:crokinole_board:work_logs:pasted:20190703-110544.png}}
+{{:projects:crokinole_board:work_logs:pasted:20190703-110544.png}}{{:projects:crokinole_board:work_logs:pasted:20190703-110828.png}}
 From [[https://www.milsims.com.au/crokinole-discs-premium-red-14|here]]. I got some red and some natural, because that's all they had in stock.
@@ Line 54: / Line 55: @@
   * Do some test cuts of some scrap plywood with the router,
   * Build a circle-cutting jig for the router
+[<6>]