Differences

This shows you the differences between two versions of the page.

--- projects:crokinole_board:work_logs:work_log_1 [2019/07/03 07:29] – tjhowse
+++ projects:crokinole_board:work_logs:work_log_1 [2022/01/23 00:22] (current) – tjhowse
@@ Line 1: / Line 1: @@
 {{indexmenu_n>1}}
+[<6>]
 ====== What I want to accomplish ======
   * Decide what to buy,
@@ Line 6: / Line 7: @@
 ====== What I've done ======
-I decided to go with oil-based everything, because I like the smell and it's much cheaper.
+I decided to go with oil-based varnish and stain because I like the smell and it's much cheaper.
-== Wax ==
+=== Wax ===
 {{:projects:crokinole_board:work_logs:pasted:20190703-065629.png}}
 This smells incredible.
-== Stain ==
+=== Stain ===
 {{:projects:crokinole_board:work_logs:pasted:20190703-065535.png}}
 This will be going in the gutter and on the strips. I'm thinking of staining only the outer of the edge strips and leaving the inner au naturale, for some contrast.
-== Varnish ==
+=== Varnish ===
 {{:projects:crokinole_board:work_logs:pasted:20190703-065603.png}}
 I had intended to get the gloss instead of the satin. I looked at some comparison photos and the difference wasn't huge. I think the surface will be plenty glossy thanks to the wax.
-== Plywood ==
+=== Plywood ===
 {{:projects:crokinole_board:work_logs:pasted:20190703-070221.png}}
-I should be able to cut the top piece of of the centre, and the bottom piece out of the corners.
+I should be able to cut the top piece out of the centre, and the bottom piece out of the corners.
-== Edge strip ==
+=== Edge strip ===
 {{:projects:crokinole_board:work_logs:pasted:20190703-070511.png}}
-== Budget so far ==
+=== Disks ===
+{{:projects:crokinole_board:work_logs:pasted:20190703-110544.png}}{{:projects:crokinole_board:work_logs:pasted:20190703-110828.png}}
-^ Item ^ Type ^ Price (AUD) ^ Consumed in one board (approx.) ^
+From [[https://www.milsims.com.au/crokinole-discs-premium-red-14|here]]. I got some red and some natural, because that's all they had in stock.
+=== Budget so far ===
+^ Item ^ Type ^ Price (AUD) ^ Pro rata^
 | Wax | Feast and Watson Natural Carnauba Wax | $41.40 | 5% |
 | Stain | British Paints Timberprotect One Coat Stain Oil-based Oak | $13.90 | 10% |
@@ Line 40: / Line 46: @@
 | Plywood | 12mm Premium BC grade 1200x897 | $35.25 | 100% |
 | Edge | Tasmanian Oak 35x4mm Square edge | $13.86 x 2 | 100% |
+| Disks| Crokinole Discs Premium | $10.51 x 2 | 100% |
 | Router bits | Ultra 12 Piece 12.7mm Router Bit Set | $50.89 | 5% |
-| | Total | $203.16 ||
+| | Total | $224.18 ||
-| | Per board Total | $75.77 ||
+| | Per board Total | $96.79 ||
 ====== What I want to accomplish next time ======
@@ Line 48: / Line 55: @@
   * Do some test cuts of some scrap plywood with the router,
   * Build a circle-cutting jig for the router
+[<6>]