Differences

This shows you the differences between two versions of the page.

--- projects:crokinole_board:work_logs:work_log_4 [2019/07/10 12:34] – tjhowse
+++ projects:crokinole_board:work_logs:work_log_4 [2022/01/23 00:23] (current) – tjhowse
@@ Line 1: / Line 1: @@
 {{indexmenu_n>4}}
+[<6>]
 ====== What I want to accomplish ======
   * Determine how to mark the lines on the board.
@@ Line 9: / Line 10: @@
 {{:projects:crokinole_board:work_logs:pasted:20190710-121328.png}}
 I attached a bolt to the side of a router dremel attachment, thinking the smaller tool would give me more control, but I didn't have good success here either. Though I got nice clean grooves cut in scrap wood when freehanding, I couldn't get reliable results when drawing big circles. It was too easy for the pivot to jam slightly, or the dremel to tip, and ruin the groove.
@@ Line 28: / Line 30: @@
 {{:projects:crokinole_board:work_logs:pasted:20190710-122939.png}}
 {{:projects:crokinole_board:work_logs:pasted:20190710-122958.png}}
+These photos show two coats of varnish atop the ink.
 I think my solution to this will be ensuring my varnish sandings are sufficiently gentle, and perhaps re-marking lines if they start to fade during the subsequent varnish layers. Overall I think this technique looks great and it's likely the one I'll be using on the final board.
@@ Line 38: / Line 41: @@
   * Drill the hole in the centre of the top,
   * Attach the bands to the base.
+[<6>]