Differences

This shows you the differences between two versions of the page.

--- projects:crokinole_board:work_logs:work_log_1 [2019/07/03 10:26] – [What I've done] tjhowse
+++ projects:crokinole_board:work_logs:work_log_1 [2022/01/23 00:22] (current) – tjhowse
@@ Line 1: / Line 1: @@
 {{indexmenu_n>1}}
+[<6>]
 ====== What I want to accomplish ======
   * Decide what to buy,
@@ Line 6: / Line 7: @@
 ====== What I've done ======
-I decided to go with oil-based everything, because I like the smell and it's much cheaper.
+I decided to go with oil-based varnish and stain because I like the smell and it's much cheaper.
 === Wax ===
@@ Line 26: / Line 27: @@
 {{:projects:crokinole_board:work_logs:pasted:20190703-070221.png}}
-I should be able to cut the top piece of of the centre, and the bottom piece out of the corners.
+I should be able to cut the top piece out of the centre, and the bottom piece out of the corners.
 === Edge strip ===
 {{:projects:crokinole_board:work_logs:pasted:20190703-070511.png}}
+=== Disks ===
+{{:projects:crokinole_board:work_logs:pasted:20190703-110544.png}}{{:projects:crokinole_board:work_logs:pasted:20190703-110828.png}}
+From [[https://www.milsims.com.au/crokinole-discs-premium-red-14|here]]. I got some red and some natural, because that's all they had in stock.
 === Budget so far ===
@@ Line 40: / Line 46: @@
 | Plywood | 12mm Premium BC grade 1200x897 | $35.25 | 100% |
 | Edge | Tasmanian Oak 35x4mm Square edge | $13.86 x 2 | 100% |
+| Disks| Crokinole Discs Premium | $10.51 x 2 | 100% |
 | Router bits | Ultra 12 Piece 12.7mm Router Bit Set | $50.89 | 5% |
-| | Total | $203.16 ||
+| | Total | $224.18 ||
-| | Per board Total | $75.77 ||
+| | Per board Total | $96.79 ||
 ====== What I want to accomplish next time ======
@@ Line 48: / Line 55: @@
   * Do some test cuts of some scrap plywood with the router,
   * Build a circle-cutting jig for the router
+[<6>]