Differences

This shows you the differences between two versions of the page.

--- projects:blinker:work_logs:2_window [2022/01/24 10:05] – tjhowse
+++ projects:blinker:work_logs:2_window [2022/01/31 03:52] – tjhowse
@@ Line 48: / Line 48: @@
 {{:projects:blinker:work_logs:pasted:20220124-100459.png}}
-After firing.
+After firing. Clarity is good. I can see some air trapped between the layers, and some other general gunk stuck in there. I think I need to use distilled water to wash after the acid bath. The cracks did not fully amalgamate, and I suspect some of the layers did not properly bond together. I might try increasing the max temperature. I have done a few experimental drops and general rough handling and it shows no sign of damage. I haven't been brave enough to drop it onto concrete or anything.
+{{:projects:blinker:work_logs:pasted:20220125-034206.png}}
+Second firing profile.
+{{:projects:blinker:work_logs:pasted:20220126-050746.png}}
+{{:projects:blinker:work_logs:pasted:20220126-050802.png}}
+{{:projects:blinker:work_logs:pasted:20220126-050817.png}}
+After the second firing. It definitely appears to have merged together more thoroughly. Some of the fine internal cracks have become invisible. I'm not sure whether this is because of the higher peak temperature or the longer time spend at temperature.
+{{:projects:blinker:work_logs:pasted:20220131-035238.png}}
+Re-firing window 1, firing window 2 for the first time.
+{{:projects:blinker:work_logs:pasted:20220131-035156.png}}
+A slower initial ramp, this time,
  [<6>]