Differences

This shows you the differences between two versions of the page.

--- projects:glass_sphere:work_logs:work_log_5 [2019/01/27 23:35] – tjhowse
+++ projects:glass_sphere:work_logs:work_log_5 [2019/01/28 11:29] – tjhowse
@@ Line 24: / Line 24: @@
 {{:projects:glass_sphere:work_logs:pasted:20190127-233452.png}}
-=== Video ===
+Looks promising...
+But no. I had to destroy the muffin tin and peel the steel off the glass in strips.
+{{:projects:glass_sphere:work_logs:pasted:20190128-005602.png}}
+{{:projects:glass_sphere:work_logs:pasted:20190128-005613.png}}
+{{:projects:glass_sphere:work_logs:pasted:20190128-005621.png}}
+{{:projects:glass_sphere:work_logs:pasted:20190128-005629.png}}
+I suspect the coating on the muffin tin decomposed at high temperatures and bubbled gas through my slugs. I threw one on the linisher to see whether it would be workable for testing polishing techniques, but the bubbles are very close to the surface and I broke through almost immediately. This results in glass fragments getting caught between the polishing surfaces and gouging around.
+Next time I will try to buy an uncoated stainless steel muffin tin, or I will pre-fire the tin on a dry run to burn off any coatings, then add a layer of release agent.
+=== Video ===
+{{youtube>AovigLSFNGs?large}}
 ====== What I want to accomplish next time ======
-  *
+  * Pre-fire the muffin tin to avoid bubbling.
+====== Bonus pics ======
+The underside of the muffin tin developed this very nice colour:
+{{:projects:glass_sphere:work_logs:pasted:20190128-010038.png}}
+{{:projects:glass_sphere:work_logs:pasted:20190128-010048.png}}
+{{:projects:glass_sphere:work_logs:pasted:20190128-010003.png}}