User Tools

Site Tools


projects:glass_sphere:housing

This is an old revision of the document!


Material selection

Glass

Glass is pretty good. When tempered and treated it's pretty shock-resistant, can handle a wide range of temperatures, handles radiation.

Toughening

Tempering glass makes it strong. I've done this already on the leaf-in-glass project. Also soaking in molten potassium nitrate at 300 degrees for a while. This patent describes a process which uses all kinds of nasties dissolved in the liquid KNO3. I'm not going to risk fluoride poisoning.

Geometry

Overall

I think the most robust shape would be a sphere. Every other shape has points or edges that would lead to higher peak stress when dropped.

Assembly

It's gotta have a hollow bit in the middle for the electronics, but I want it to be as close to solid as possible. My current plan is to create the sphere in two unequal halves, one with a void in the centre for the electronics and the other part caps off the hole.

Shielding

Some of the cooler options for electronics inside the sphere require microcontrollers and flash storage, which would have their effective lives extended with some radiation shielding. I'll use a leaded potting compound (if it exists), or lead sheets wrapped around the electronics.

projects/glass_sphere/housing.1546678468.txt.gz · Last modified: 2019/01/05 08:54 by tjhowse