Differences

This shows you the differences between two versions of the page.

--- projects:arlec_smart_fans:overview [2023/10/30 11:21] – tjhowse
+++ projects:arlec_smart_fans:overview [2023/11/01 04:57] (current) – tjhowse
@@ Line 21: / Line 21: @@
 {{:projects:arlec_smart_fans:pasted:20231030-080423.png}}
+{{:projects:arlec_smart_fans:pasted:20231101-045735.png}}
 <code>
@@ Line 69: / Line 71: @@
     warm_white_color_temperature: 400 mireds
 </code>
+Initial flashing done with a USB-TTL serial adaptor using the wiring diagram shown above and ltchiptool. I took a backup of the stock firmware with <code>ltchiptool flash read ambz stock.bin</code> then I used esphome to generate the uf2 file and flashed it using <code>ltchiptool flash write <filename>.uf2</code>
+ Works mostly perfectly. OTA updates via wifi only work occasionally, perhaps inside a 30-60 second window after the RTL chip powers on. It takes a fair bit of bouncing the power and retrying the connection to get it to stick.