projects:3d_printed_enigma_machine:work_logs:work_log_1
Differences
This shows you the differences between two versions of the page.
Last revisionBoth sides next revision | |||
projects:3d_printed_enigma_machine:work_logs:work_log_1 [2019/05/07 12:29] – created tjhowse | projects:3d_printed_enigma_machine:work_logs:work_log_1 [2019/05/07 12:30] – tjhowse | ||
---|---|---|---|
Line 6: | Line 6: | ||
====== What I've done ====== | ====== What I've done ====== | ||
- | My old design, as shown in the youtube videos, has big friction problems. The rotors would index together tightly in the correct alignment, but not reliably and the conductivity was poor. It was hard to get all 24 points touching | + | My old design, as shown in the youtube videos, has big friction problems. The rotors would index together tightly in the correct alignment, but not reliably and the conductivity was poor. It was hard to get all 24 points touching |
Enter: low profile beefy pogo pins. | Enter: low profile beefy pogo pins. |
projects/3d_printed_enigma_machine/work_logs/work_log_1.txt · Last modified: 2019/05/07 12:31 by tjhowse