Differences

This shows you the differences between two versions of the page.

--- projects:crokinole_board:work_logs:work_log_2 [2019/07/05 13:00] – tjhowse
+++ projects:crokinole_board:work_logs:work_log_2 [2022/01/23 00:22] (current) – tjhowse
@@ Line 1: / Line 1: @@
-{{indexmenu_n>1}}
+{{indexmenu_n>2}}
+[<6>]
 ====== What I want to accomplish ======
   * Do some test cuts of some scrap plywood with the router,
@@ Line 22: / Line 23: @@
 {{:projects:crokinole_board:work_logs:pasted:20190705-125530.png}}
+I ran a great many cuts in different directions with different feedrates.
+{{:projects:crokinole_board:work_logs:pasted:20190707-031415.png}}
+My conclusion is that the direction doesn't matter all that much. Variability in the texture of the ply makes a bigger difference. This said, I generally got the best results moving at about 10-20mm/sec with a 6mm straight bit cutting all the way through 12mm ply, turning counter-clockwise with a clockwise-spinning bit.
 === Stain test ===
@@ Line 34: / Line 41: @@
 ====== What I want to accomplish next time ======
-  * Go through a few varnish -> sand -> varnish cycles and see how this scrap piece improves.
+  * Go through a few varnish -> sand -> varnish cycles and see how this scrap piece improves,
+  * Build a wood steamer and bend the edge strips.
+[<6>]