projects:blinker:work_logs:9_resin_casting
Differences
This shows you the differences between two versions of the page.
Both sides previous revisionPrevious revision | Next revisionBoth sides next revision | ||
projects:blinker:work_logs:9_resin_casting [2022/04/18 00:19] – tjhowse | projects:blinker:work_logs:9_resin_casting [2022/04/18 00:22] – tjhowse | ||
---|---|---|---|
Line 6: | Line 6: | ||
===== The Plan ===== | ===== The Plan ===== | ||
- | I wanted to run a medium-duration test of the electrically-complete blinker before going through all the trouble and expense of encasing it in aluminium and glass. I decided to cast the electronics in transparent resin. This would be reasonably mechanically and chemically robust, but it would degrade in sunlight over a few years, turning yellow and crumbling. | + | I wanted to run a medium-duration test of the electrically-complete blinker before going through all the trouble and expense of encasing it in aluminium and glass. I decided to cast the electronics in transparent resin. This would be reasonably mechanically and chemically robust, but it would degrade in sunlight over a few years, turning yellow and crumbling. |
===== The Results ===== | ===== The Results ===== |
projects/blinker/work_logs/9_resin_casting.txt · Last modified: 2022/04/18 05:02 by tjhowse