User Tools

Site Tools


projects:blinker:work_logs:8_solar_cells

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision
Previous revision
projects:blinker:work_logs:8_solar_cells [2022/04/04 00:31] tjhowseprojects:blinker:work_logs:8_solar_cells [2022/04/17 23:45] (current) tjhowse
Line 50: Line 50:
  
 All of this testing was done on a single 125x125 solar cell. I have another nine of them to experiment with. I would like to see how these cells respond to a CO2 laser. I work with people who built solar racing cars, and so have experience with this kind of thing. We also have a water jet cutter at work, which might be worth a try. All of this testing was done on a single 125x125 solar cell. I have another nine of them to experiment with. I would like to see how these cells respond to a CO2 laser. I work with people who built solar racing cars, and so have experience with this kind of thing. We also have a water jet cutter at work, which might be worth a try.
 +
 +==== Unearned success ====
 +
 +I was at Bunnings (a hardware store) for an unrelated reason and I saw some solar-powered garden lights with various configurations of solar cells. They were mostly under AUD$10 so I grabbed an 8-solar-cell LED light on a stake.
 +
 +{{:projects:blinker:work_logs:pasted:20220417-233721.png}}
 +
 +{{:projects:blinker:work_logs:pasted:20220417-233636.png}}
 +
 +{{:projects:blinker:work_logs:pasted:20220417-234440.png}}
 +
 +I drilled a small hole in the bezel to make the LED visible from the front.
 +
 +I connected the 8 cell panel to a blinker circuit and it generates enough power to overwhelm the voltage limiting zener and the supercap overvolted to 3.1V. I did some experimentation with covering up cells with tape, but quickly realised that dark cells don't pass current.
 +
 +{{:projects:blinker:work_logs:pasted:20220417-234033.png}}
 +
 +I dug through the polymer coating with a hot air gun and knife to expose a connector and soldered on a wire that bypassed two of the cells. This gave me the following results under direct sun when connected to the blinker:
 +
 +{{:projects:blinker:work_logs:pasted:20220417-234304.png}}
 +
 +I was pretty happy with that, however it did sneak pretty close to the voltage limit of the supercap. I decided I would go with a 5-cell array for the final version.
 +
 +{{ youtube>lZiL-H9wsoI?large }}
  
 ==== Success again ==== ==== Success again ====
Line 80: Line 104:
  
 Success: Success:
 +
 +{{ youtube>lZiL-H9wsoI?large }}
  
 {{ youtube>E3jePteZ7Yw?large }} {{ youtube>E3jePteZ7Yw?large }}
projects/blinker/work_logs/8_solar_cells.1649032281.txt.gz · Last modified: 2022/04/04 00:31 by tjhowse